This is an accordion element with a series of buttons that open and close related content panels.
Permit Upgrades
A CoE permit (Lab Orientation OR red/green permit is sufficient) and paid materials fee for this semester are required. Our student staff are required to swipe your ID every time to verify.
Note: College of Engineering faculty and staff are not required to pay the materials fee, however, they must have a CoE permit.
Equipment Specs
| Type of Equipment | Make | Model | Qty | Type | Permit Required | URL of Manual in " " | Technical Data | URL of Specs in " " |
|---|---|---|---|---|---|---|---|---|
| Creaform | Handyscan 700 | 1 | Hand-held 3D Scanner with Turntable | Lab Orientation+staff | "https://www.creaform3d.com/sites/default/files/assets/brochures/files/handyscan3d_brochure_en_hq_21032017_2.pdf" | Specs | "https://www.creaform3d.com/sites/default/files/assets/brochures/files/handyscan3d_brochure_en_hq_21032017_2.pdf" | |
| Einscan | 1 | Bench-top 3D Scanner with Turntable | Lab Orientation | "https://www.einscan.com/einscan-quick-start-guide" | Specs | "https://www.einscan.com/einscan-se-sp" | ||
| Scanse | Sweep | 1 | Lidar sensor | Lab Orientation | "https://s3.amazonaws.com/scanse/Sweep_user_manual.pdf" | |||
| Structure | 2 | iPad and mount | Lab Orientation | "https://structure.io/getstarted" | Developers) | "https://structure.io/developers" |
We have a dedicated room for 3D scanning:
Software
Stucture Sensor (iPad-mounted): All the scanning software is built into the iPad you check-out with the scanner. You will email an .stl file to yourself through the app, which can be opened + edited using Mesh Mixer (free, go here to download) or other mesh editing software. Mesh Mixer is installed on all of the CAE computers in the Makerspace.
Einscan SP: The scanning software is installed on the CAE computer next to the scanner (ask our staff to help if needed). Or you can install it yourself here and use your own laptop. You email an .stl file to yourself, which can be edited using Mesh Mixer (free, go here to download) or other mesh editing software. Mesh Mixer is installed on all of the CAE computers in the Makerspace.
Creaform HandySCAN: The scanning and mesh editing software is called VX Elements, which is only available on Makerspace computers. See our staff for more info. You can also use your own software such as DesignX, etc. Talk to our staff for more info.
3D Scanner Managers
Do you have a question about 3D Scanning?
Below is the schedule of our most knowledgable staff when it comes to 3D scanning. Find a time when they’re working and then come in and ask the front desk staff to help you find them.
Note: Make sure to only come for help during the Makerspace hours here.
Or email: maker-3dscan@engr.wisc.edu
| Support Staff | Date | Start Time | End Time |
|---|---|---|---|
| Christian Martinez | 01/26/2022 | 09:00 AM | 12:00 PM |
| Kirk Mendoza | 01/26/2022 | 11:30 AM | 02:30 PM |
| Christian Martinez | 01/28/2022 | 09:00 AM | 12:00 PM |