Electronics

This is an accordion element with a series of buttons that open and close related content panels.

Permit Upgrades

A CoE permit (Lab Orientation OR red/green permit is sufficient) and paid materials fee for this semester are required. Our student staff are required to swipe your ID every time to verify.

Note: College of Engineering faculty and staff are not required to pay the materials fee, however, they must have a CoE permit. 

List of Electronics Equipment in the Makerspace

 

Make Model Qty Type and Features Permit Required
Keysight E3631A 12 Power Supply, 80W Triple Output 6V, 5A & ±25V, 1A Blue Manufacturer’s Manual Specs
Keysight 33210A 12 Function / Arbitrary Waveform Generator, 10 MHz Blue Manufacturer’s Manual Specs
Keysight MSOX3024T 12 Mixed signal oscilloscope 200 MHz 5GSa/s Blue Manufacturer’s Manual Specs
Keysight 34450A 12 Digital Multimeters, 5 ½ digi Blue Manufacturer’s Manual Specs
AmScope SM-3TZ-80S 1 Microscope, 3.5X-90X Blue Manufacturer’s Manual Specs
Hakko FX-951-66 20 Soldering Iron, 120 Watts 400-840F Blue Manufacturer’s Manual Specs
Hakko FM-203 2 Dual Port Soldering 140 Watts Blue Manufacturer’s Manual Specs
Hakko FM-2032-52 3 FM-2032 micro soldering iron Blue Manufacturer’s Manual Specs
Hakko FR-810B 4 SMD Hot Air Rework Station Blue Manufacturer’s Manual Specs
SRA 103 2 Soldering Dispenser Blue Manufacturer’s Manual Specs
SRA 102 5 Soldering Dispenser Blue Manufacturer’s Manual Specs
Reflow Ovens T962 6 Reflow oven Blue Manufacturer’s Manual Specs

Electronics Kits (Arduinos, Soldering, Sensors, etc.)

The following kits are available for check out and use in the Makerspace:

Microcontroller Kits

  • Arduino*
  • Particle*
  • Raspberry Pi*

Electronics Kits:

  • Basic Soldering
  • Micro Soldering
  • PCB Assembly
  • Measurement (multimeter)

Sensor Kits:

  • Basic Sensors* ( go here for a complete list & datasheets )
  • LiDAR Kit** (Sick TIM 561)

* Indicates item is also for sale in the Mini-Mart.
**Instructors may check out this kit for multiple days out side of the Makerspace, contact the Shop Manager.

Do you have a question about Electronics?

Below is the schedule of our most knowledgable staff when it comes to electronics. Find a time when they’re working and then come in and ask the front desk staff to help you find them.

Note: Make sure to only come for help during the Makerspace hours here.

or e-mail: maker-electronics@engr.wisc.edu